The Railway & Modellers Junction Web Shop

CATALOGUE > PLASTIC MODEL KITS > STAR WARS AND SPACE MODELS > REVELL STAR WARS

	STAR WARS Anakin's Jedi Starfigter "easykit" Ref: REV06650 Easy and Fun! The simple clip-together kits get beginners off to a flying start! 1,2,3 and your model is ready! Easy for beginners, ideal for collectors! - Multicolor clip-together models! - No painting necessary! - Simply clip together, no gluing! During the Battle over Coruscant which took place at the beginning of the action thriller "Star Wars III - the Revenge of the Sith", Anakin Skywalker and his teacher Obi-Wan Kenobi were ordered to free Grand Chancellor Palpatine from the hands of the enemy Confederate Army. Anakin Skywalker sets out accompanied by his resourceful robot R2-D2 with the small Eta-2 Jedi Starfighter. The Eta-2 Jedi Starfighter is the most advanced fighter plane ever made. Anakin's state-of-the-art fighter has yellow markings, reminiscent of his podracer that freed him from slavery on Tattoine. Yellow markings were also carried by the Airspeeder with which he hunted the bounty-hunter Zam Wessel through the streets of Coruscant. Anakin is reputed to be the "best pilot in the galaxy" and his manoeuvres take the Starfighter right to the limits of its capabilities. These dare-devil manoeuvres are extremely successful, but not always........... Price: £6.74 / $12.82 (Including: VAT at 17.5%)


	STAR WARS Obi-Wan's Jedi Starfighter "easykit" Ref: REV06651 Easy and Fun! The simple clip-together kits get beginners off to a flying start! 1,2,3 and your model is ready! Easy for beginners, ideal for collectors! - Multicolor clip-together models! - No painting necessary! - Simply clip together, no gluing! During the Battle over Coruscant, of the central political world, Obi-Wan Kenobi and his Padawan Anakin Skywalker embark on their most important mission for the Republic. Both Jedi are instructed to release the Grand Chancellor from the hands of the enemy Confederate Army. Side by side the two Jedi battle their way through until they have fulfilled their dangerous mission. Like the young Skywalker, Obi-Wan also has the use of a little Eta-2, one with dark red markings. The Eta-2 Jedi Starfighter is the most highly developed fighter ever built. At 12,000 km/h it reaches a speed that few enemies can equal. The Starfighter, much smaller and lighter than its predecessors and therefore more manoeuvrable, can even fly at the speed of light. The cockpit contains fewer complex instruments, so that it does not need a co-pilot. Obi-Wan can only call on one R2. Due to its small size and low weight the Jedi Starfighter is capable of dare-devil, death-defying manoeuvres ....... Price: £6.74 / $12.82 (Including: VAT at 17.5%)


	STAR WARS Droid Tri-Fighter "easykit" Ref: REV06652 Easy and Fun! The simple clip-together kits get beginners off to a flying start! 1,2,3 and your model is ready! Easy for beginners, ideal for collectors! - Multicolor clip-together models! - No painting necessary! - Simply clip together, no gluing! During the Battle over Coruscant, the political power centre of the galaxy, this agile fighter is used by the separatist hundreds. In flight the central enclosure of the pilot remains in one position while the outer section with its three outriggers rotates round this centre. The most devastating weapon carried by the Tri-Fighter is the missile with the buzz droids. When one of the missiles meets its target it releases these treacherous droids that attach themselves to the outside of the starfighter and immediately begin to damage the vessel's systems or R2s. Once these little droids have been released it is almost impossible to get rid of them. Instead of a crew, the control centre contains only a droid computer that operates the three light laser cannon in seconds. In the Battle over Coruscant the Droid Tri-Fighters prove to be a serious opponent. They appear to be innumerable and a victory for the Republic is by no means a foregone conclusion ...... Price: £6.74 / $12.82 (Including: VAT at 17.5%)


	STAR WARS ARC-170 Clone Fighter "easykit" Ref: REV06653 Easy and Fun! The simple clip-together kits get beginners off to a flying start! 1,2,3 and your model is ready! Easy for beginners, ideal for collectors! - Multicolor clip-together models! - No painting necessary! - Simply clip together, no gluing! In support of Anakin and Obi-Wan in the Battle of Coruscant, the two Jedi are escorted by a squadron of ARC-170 fighters (= aggressive reconnaissance fighters). Absolutely loyal to the Republic, the clone pilots have the mission of diverting the Trade Federations fighters and clearing the way for the Jedi. With the inbred obedience that they received in the Kamino breeding station, these brave fighters voluntarily sacrifice themselves, so that the Jedi can fulfill their mission. However, the Clone pilots also have access to the skills of the bounty hunter Jango Fett and place themselves in the path of the enemy undaunted by death. The reconnaissance fighter has a class 1.5 hyperdrive and carries torpedoes and laser cannons. It is therefore less manoeuvrable than the Jedi Starfighter and the fate of the ARC-170 is decided solely by the know-how of the three-man crew..... Price: £11.99 / $22.77 (Including: VAT at 17.5%)


	STAR WARS AT-RT "easykit" Ref: REV06654 Easy and Fun! The simple clip-together kits get beginners off to a flying start! 1,2,3 and your model is ready! Easy for beginners, ideal for collectors! - Multicolor clip-together models! - No painting necessary! - Simply clip together, no gluing! The Separatists make their presence felt throughout the galaxy. It is not only on Coruscant that it erupts in conflict. The Republic uses on various planets machines specially designed for their particular environment. In order to defend Kashyyyk, the home planet of the Wookiees and Chewbacca, against the attack of the Separatist Droid Army, the Army of the Republic has recourse to AT-RTs, with a weight of 400 kg. Originally designed purely for reconnaissance purposes, this 75 km/hour transport proves to be extremely effective and useful against enemy infantry units, thanks to its devastating blaster cannon located in the front of the AT-RT. Price: £11.99 / $22.77 (Including: VAT at 17.5%)


	STAR WARS TIE Fighter (Darth Vader) "easykit" Ref: REV06655 Fully Painted Snap Model Kits! Darth Vader used this prototype as the basis for the terrifyingly effective TIE interceptor in the Battle of Yavin. Unlike all other TIE fighters this prototype has a deflector shield generator and a simple hyperdrive. Vader's TIE Advanced is armed with heavy twin blaster cannon on fixed mounts but has no life support systems. The TIE Advanced is characterised by a hull made of duralloy steel, an extended after deck and unique solar cell wings. The Tie Advanced quickly became one of Darth Vader's favourite ships. Like all the TIE ships the prototype has a drive system consisting of twin ion engines. Its solar ionization reactor is reputed to be much more powerful than that of the standard TIE fighters. The TIE Advanced has proved itself in battle, as it is capable of withstanding many direct hits. In addition the pilots' chances of survival were considerably enhanced by the incorporation of a hyperdrive system, which enables the ship to escape from hopeless battle situations. Model-details: - quickly assembled - no glueing required - no painting required - multicolour printed - with illustrated assembly instructions - movable cockpit cover - including figure - including display stand Price: £11.99 / $22.77 (Including: VAT at 17.5%)


	STAR WARS X-wing Fighter (Luke Skywalker)"easykit" Ref: REV06656 Fully Painted Snap Model Kits! This is the most important rebel alliance fighter and one of the most powerful single-seat space ships ever produced. The T-65 X-wing Fighter owes its name to the double wings one above the other that form an X in combat in order to increase the firing range of the pilot. In addition to four high-energy laser cannon the X-wing Fighter has proton torpedoes, deflector shields, hyper drive and a navigation droid. Luke Skywalker prefers this type of fighter. It was used by the young Jedi to destroy the first Death Star in the Battle of Yavin. The X-wing Fighter quickly proved to be one of the most effective military aircraft in the galaxy. The unusual wing design of the T-65 is frequently regarded as the success formula of the space ship. The pair of twin wings remains closed during normal flights under the speed of light. In combat and on entry into the atmosphere of a planet, they can be extended. On the wing tips are high-energy laser cannon that can be fired singly, simultaneously, in pairs or in other combinations. Model-details: - quickly assembled - no glueing required - no painting required - multicolour printed - with illustrated assembly instructions - movable wings - laser canons - movable cockpit cover - can be assembled with or without undercarriage - including 2 figures Price: £11.99 / $22.77 (Including: VAT at 17.5%)


	STAR WARS Imperial Shuttle "easykit" Ref: REV06657 Fully Painted Snap Model Kits! A heavily armoured transport and passenger shuttle of the Lambda class with three wings and seating for up to 20 soldiers. Shuttles of the Lambda class, due to their fire-power and hyperdrive, are preferred by the imperial officers, including the Emperor himself. The troops of Han Solo have used this ship, the Tydirium, in order to sneak past the imperial forces encircling the forest moon Endor. Shuttles of the Lambda class are designed to carry up to twenty passengers or eighty tonnes of freight. Unlike similar imperial transports the Lambda shuttles are equipped with a hyperdrive that enable them to carry passengers and freight between different stellar systems and fleets. By way of protection the shuttle has two forward-firing double-barrelled laser cannon, two forward-firing double-barrelled blaster cannon and one tail-mounted double-barrelled blaster cannon. Model-details: - quickly assembled - no glueing required - no painting required - multicolour printed - with illustrated assembly instructions - movable wings and laser canons - movable cockpit cover - can be assembled with or without undercarriage - including 2 figures Price: £15.99 / $30.39 (Including: VAT at 17.5%)


	STAR WARS Millennium Falcon "easykit" Ref: REV06658 Fully Painted Snap Model Kit! This Corellian tranporter is reputed to be one of the fastest and best-equipped ships in the galaxy. The Millennium Falcon may look old and broken down, but continual modifications have made it into something special. The crew has for years consisted of the reckless pilot and smuggler become hero of the rebel alliance, Han Solo, and his co-pilot and technician, the trusty Wookiee Chewbacca. A long time ago Solo won the ship from Lando Calrissian in a game of sabacc. The Corellian transport type YT-1300 played an important role in the destruction of both battle stars and is probably the most famous ship in the galaxy. Inside the ship there is a hyperdrive that gives it almost double the speed of any imperial star cruiser. The heavily armoured Falcon has an illegal bank of sensors that can track distant imperial ships before they are aware of its presence. The ship goes into battle with the most up-to-date imperial deflector system, two quad laser cannon and two disruptors. Model-Details: - quickly assembled - no glueing required - no painting required - multicolour printed - with illustrated assembly instructions - can be assembled with or without undercarriage - including 2 figures Price: £22.98 / $43.66 (Including: VAT at 17.5%)

CATALOGUE > PLASTIC MODEL KITS > STAR WARS AND SPACE MODELS > REVELL STAR WARS

Your Shopping Basket

[ View Basket ] [ Checkout ]